In this report we describe an adaptive Simulated annealing method for sizing the devices in analog circuits. The motivation for use an adaptive Simulated annealing method for analog circuit design are to increase the efficiency of the design circuit. To demonstrate the functionality and the performance of the approach, an operational transconductance amplifier is simulated. The circuit is modeled with symbolic equations that are derived automatically by a simulator..

Today electronics becomes more and more complex and to keep low costs and power consumption, both digital and analog parts are implemented on the same chip. The degree of automization for the digital parts have increased fast and is high, but for the analog parts this has not come through. This have created a big gap between the degrees of automization for the two parts and makes the analog parts the bottleneck in electronics develop. Research is ongoing at Electronics systems group at Linköping University target the increase of design automization for analog circuits. An optimizationbased approach for device sizing is developed and for this a good optimization method is needed which can find good solutions and meet the specification parameters.

I det här arbetet har algoritmen Simulated annealing undersökts med avseende på dess möjlig att användas för att minimera av kostnaden för ett singelfrekvensnät för digital tv. Undersökningen är gjord genom att simulera ett antal testfall för att utreda hur olika ingående optimeringsparametrar inverkar på slutresultatet. Alla försök har genomförts i ett egenkonstruerat simuleringsverktyg, gjort i Matlab. En jämförelse av resultaten för två olika sätt att hantera täckningskraven har också gjorts, Simulated annealing med- respektive utan straff metod. Alla genomförda försök har genererat en betydande kostnadssänkning jämfört med startkonfigurationen.

  Befintliga studier har påvisat att genetiska algoritmer presterar bättre om de ges en bra startpopulation. I denna rapport presenteras en lokal sökalgoritm för att skapa en population med fokus på ?vehicle routing?-problem. Algoritmen använder sig av heuristik i en blandning av Simulated annealing och tabu search för att skapa individerna till populationen. Utvärderingar av algoritmen på ett praktiskt problem visar att den ger en bra start jämfört med en slumpmässig startpopulation, vilket är vanligt att använda.

Detta examensarbete har utförts på och i samarbete med ITN, Institutionen för Teknik och Naturvetenskap, vid Linköpings Universitet. Problemställningen härrör från tidigare projektsamarbete mellan Linköpings Universitet, Telia AB och Ericsson. Uppgiften består i att ta fram en optimeringsalgoritm som använder sig av ett nytt angreppssätt genom att försöka minska osäkerheten på indata..

At Sandvik Materials Technology, Argon gas is used as furnace atmosphere when heattreating hot rolled wire. Upon heating chromium steel wire, a rich oxidelayer forms on the wire surface. The abstract of this masters thesis is to enhance the understanding of the constitution of the oxidelayers and the influence of the furnace atmosphere. This will be achieved by performing a number of annealing experiments on laboratory level. Also, the aim is to understand the chemical reactions and physical mecanisms controlling the pickling process.

On today?s competitive market, it is difficult to achieve profitability trough high prices on manufactured products. Profitability must be obtained through low manufacturing costs, high quality and short lead times. One of the companies on the market is Sandvik Coromant, manufacturer of tools and chips for metal cutting. This master thesis investigates the methods of manufacturing for boring bars at the manufacturing unit GVH4 at Sandvik Coromant in Gimo, Sweden.

In industrial control systems PID-control remains the prevalent strategy, also for processes that would benefit from model based control. The purpose of this thesis is to evaluate whether model based control can be readily implemented in an industrial control system. To this end a simulated surge tank with a simulated industrial control system is studied. For evaluation two scenarios with specified objectives are selected.Following a review of LQR and versions of MPC, Predictive Functional Control (PFC) is considered the most suitable for implementation. PFC is a form of MPC developed with industrial applications in mind and therefore has several advantages for implementation in an industrial control system.

This report present a working model for simulation of what happens to colors displayed on screens when they are observed through optical filters. The results of the model can be used to visually, on one screen, simulate another screen with an applied optical filter. The model can also produce CIE color difference values for the simulated screen colors. The model is data driven and requires spectral measurements for at least the screen to be simulated and the physical filters that will be used. The model is divided into three separate modules or steps where each of the modules can be easily replaced by alternative implementations or solutions.

Empirical research shows that a possible reason why Swedish students mathematical knowledge deteriorates can be a too big focus on imitative reasoning, i.e. recalling solutions or follow algorithms, and a lack of creative mathematical reasoning, i.e. when a student construct his/her own solution and motivates its plausibility with mathematically well-founded arguments. The purpose of this study is therefore to examine if, and in what way, lecturers can provide students an opportunity to learn creative reasoning by simulating creativity in their presentations of examples. Six lectures were observed and 22 task situations were analyzed with respect to three aspects; reflection, plausibility and mathematical foundation, which are to be present in the situation if the reasoning will be seen as simulated creative.

The aim of this report was to investigate the hypothesis that Norway spruce (Picea abies L. Karst), planted on poor ?Scots pine? stands will not have sustained growth during the whole rotation, due to water deficit in the closed stands. In order to investigate this hypothesis, data from 10 Norway spruce stands in southern-eastern Sweden were collected. In 10 plots in each stand, diameter and breast heights were measured on every tree.

To measure losses in a transformer with today?s methods is either slow or insecure. There s a new method developed by Alstom that hasn't been actualize in to a test-system and that has been the assignment in this project. The idea is built on a switched system and a CLR- circuit in the resonant frequency. The test-system has a calculated power-loss that make the efficiency to be as high as 99,8% and in reality over 95%.

The county of Dalarna is at present carrying through a process of digitalization where traditional x-ray film is being replaced with digital detectors. Earlier used methods for dose optimization turned out not being sufficient. This report presents a method to harmonize dose levels between x- ray sites equipped with Fujifilm imaging plate systems. An exposure index, S, related to the dose level of the examination is computed to every x-ray image. S turned out to be inversely proportional to the detector dose used at the examination.

With knowledge of how the southern Swedish forests have been affected by storms the past years, this study intended to find out which factors affect the storm firmness of a stand the most. The study was based on data from stands in the, by the storm Gudrun, affected area. The results of the analyses that tested the stand factors that influence the amount of storm damage to the greatest extent showed that the storm sensitivity of Norway spruce stands were largely due to previous management actions. The factors that could be controlled by thinning and had relevance of storm damage standpoint, according to the results were; the dominant height, volume, basal area weighted mean diameter and stand age at last thinning. In this study, these results are not as clear for Scots pine.

The aim of this study is to find a method to incorporate the energydemand of a building in the investment cost estimate.The study is based on an actual apartment block. The significant energyaspects are identified, and changed to more energy efficient options.These are then simulated using the energy calculation program VIP+.The calculated energy need is used in the investment cost estimate, andthe simulated alternatives are compared in regards to their economicalprofitability.Depending on the focus, different alternatives are the most advantageous.Since this study aims to show which alternative is the mosteconomically profitable, the annual profit is the parameter of mostimportance. This means that individual measuring of heating and hotwater use is the recommended change of the original house. A changeof the windows to new ones with a U-value of 1,0 as well as 0,8W/m2K also results in a positive change of the annual profit comparedto the original house..